- Bump JOC_VERSION to 0.6.2. - Add a "Dolby Dialnorm loudness (-31 dBFS)" preference switch. - Persist the setting as dialnorm and allow JOC_DIALNORM to override it. - Apply -target_level -31 only to the ffmpeg-decoded 5.1 E-AC-3 core; leave the 7-channel core and ordinary PCM takeover paths unchanged. - Remove stale SOFA measurement-set wording from the READMEs. - Rebuild and deploy both x86 and x64 components.
foo_input_joc — foobar2000 input component for E-AC-3 JOC
简体中文 · Install · Settings · Building · Known limitations
A foobar2000 input component for E-AC-3 JOC (Dolby Atmos) files: the JOC object and OAMD
metadata is taken from the E-AC-3 syncframes and paired with the core PCM that ffmpeg decodes
(5.1 or 7 channels, following joc\_dmx\_config\_idx), then rendered in real time to headphones
(HRTF) or to a speaker layout from 2.0 up to 9.1.6. The
rendering core is compiled into the component, so there is nothing to install beside
foo_input_joc.dll.
Input is a bare .eac3 / .ec3 stream, or an E-AC-3 JOC track inside a container (.mp4
.m4a .m4b .m4p .m4r .mov .mkv .mka .webm). A file without JOC is not claimed:
plain AC-3 / E-AC-3, a container whose audio track is AAC, and transport streams are all handed
back to foobar2000 and play through the decoder it would have used anyway.
Requirements
- foobar2000 1.6 (32-bit) or 2.x (32-bit and 64-bit).
- An
ffmpegexecutable, found onPATHby default; the preferences page can name one. - For binaural output, an HRTF data file. This repository does not ship one — see HRTF data.
Install
Download the package for your architecture from Releases — a pushed v* tag
makes CI attach both — or build it yourself as described under Building and take the
result from dist\; either way the file is foo_input_joc-<version>-<arch>.fb2k-component. Drop
it onto foobar2000, or use Preferences → Components → Install, and restart. Take -x86 for
foobar2000 1.6 and 2.x 32-bit, -x64 for 2.x 64-bit.
To install by hand, copy foo_input_joc.dll into the per-component subdirectory of the
user-components folder the running version reads:
| foobar2000 | Folder |
|---|---|
| 1.6 | <profile>\user-components\foo_input_joc\ |
| 2.x | <app>\user-components\foo_input_joc\ (also in portable mode) |
The subdirectory is required — a DLL lying directly in user-components\ is not scanned — and a
component placed in the folder the running version does not read, or built for the other
architecture, is ignored without a message.
tools/deploy.ps1 -TestBed <portable foobar2000> is the scripted form of the manual steps, and
tools/run.ps1 -TestBed <path> -Play <file> plays a file unattended and prints the log. Let
foobar2000 exit through /exit: a force-killed instance leaves a <profile>\running marker
behind, and the next start then refuses to load any user component.
Containers need one look at the decoder list
foobar2000 asks the decoders in the order shown in Preferences → Decoding, and the built-in container readers are in that list. When one of them is offered an MP4 or Matroska file first, it takes the file and the JOC objects are lost — such a file then plays as plain E-AC-3.
So move JOC decoder (E-AC-3 JOC) above foobar2000 MP4 Demuxer and foobar2000
Matroska/WebM Reader in that list. Bare .eac3 / .ec3 files do not depend on the order.
Settings
Preferences → Tools → JOC decoder:
- Output — Binaural (HRTF), or a Speaker layout from 2.0 to 9.1.6 (names and channel order in the table below);
- Binaural mode (near / mid / far) and the room tail in seconds;
- HRTF — a Rosella personalized model. An empty path means the default
location,
<component directory>\HRTF\binaural.personalized_headphone; - Gain — a switch and a value in dB. Binaural rendering can exceed full scale on material that does not clip in the core mix, so attenuation belongs here;
- Force 24-bit output (int24) — off by default, which delivers float32. When on, every sample is quantised with the core's own int24 rule (clip to ±1, ×8388607, truncate) before it is handed over, the samples that had to be clipped are counted in the log, and the component reports the file as 24-bit fixed point. The renderer itself stays float32: this is the precision the decoder delivers, not the output device's bit depth, which is set in Preferences → Output. Reload a file's information after flipping this switch (Properties → Reload info, or remove the file from the Media Library and add it again): foobar2000 caches technical information per file, and until it is reloaded Properties and the Converter still go by the old 32-bit floating-point answer, warning that the encoder does not take floating-point input.
- Swap side and rear channels — off by default. When on,
LsandLrs, andRsandRrs, are exchanged just before the PCM is handed over (5↔7 and 6↔8 counting from one in 7.1). It only applies to layouts that carry both a side and a rear pair — 7.1, 7.1.2, 7.1.4, 9.1.4 and 9.1.6 — so the top channels in the last two slots of 5.1.2 and 5.1.4 are never touched. Only the delivered channel order changes; decoding, object positions and the layout table are untouched, and both the float32 and the int24 delivery carry the swap. - the ffmpeg.exe executable to use.
- Language — Follow system / 简体中文 / English. Every string on the page, the status lines and the errors a user can see use the selected language, and switching takes effect immediately; the choice is stored in the component's own configuration. "Follow system" goes by the Windows user-interface language: Chinese (including Traditional) reads the simplified Chinese column, everything else reads English. The setting only affects interface text; decoding and rendering never read it.
No control on the page is disabled, and the status line states what is in effect. The control names above are the English ones; the Chinese page names the same controls 输出, 扬声器布局, 双耳模式, HRTF 文件, 增益.
HRTF data
A personalised headphone model (HRTF\binaural.personalized_headphone) is supplied by whoever
runs the component, and is listed in .gitignore so it cannot be committed by accident. Speaker layouts
need none. Binaural rendering without an HRTF fails with a message naming the file it looked for.
Speaker layouts and channel order
The PCM this component hands to foobar2000, and the multichannel WAV files the Converter writes, follow the renderer's channel order:
| Layout | Channel order |
|---|---|
| 2.0 | L, R |
| 3.1 | L, R, C, LFE |
| 4.0 | L, R, Lrs, Rrs |
| 5.1 | L, R, C, LFE, Ls, Rs |
| 7.1 | L, R, C, LFE, Ls, Rs, Lrs, Rrs |
| 5.1.2 | L, R, C, LFE, Ls, Rs, Ltm, Rtm |
| 5.1.4 | L, R, C, LFE, Ls, Rs, Ltf, Rtf, Ltr, Rtr |
| 7.1.2 | L, R, C, LFE, Ls, Rs, Lrs, Rrs, Ltm, Rtm |
| 7.1.4 | L, R, C, LFE, Ls, Rs, Lrs, Rrs, Ltf, Rtf, Ltr, Rtr |
| 9.1.4 | L, R, C, LFE, Ls, Rs, Lrs, Rrs, Lw, Rw, Ltf, Rtf, Ltr, Rtr |
| 9.1.6 | L, R, C, LFE, Ls, Rs, Lrs, Rrs, Lw, Rw, Ltf, Rtf, Ltm, Rtm, Ltr, Rtr |
4.0 is the quad layout this project adds (the traditional FL FR BL BR, here L R Lrs Rrs): a
front and a back pair with neither a centre nor an LFE — an object straight ahead is a phantom image
of the front pair, and the LFE in the input has no output channel in this layout, so by the core's
rule it is not mixed into the others. Every other layout and channel order follows the Dolby
specifications.
Channel order and the foobar2000 limitation. The component hands the renderer's PCM over
unchanged, in the order of the table above; when that stream is written to WAV (the playback chunk or
a Converter output), the order of the 1–16 channels follows the Dolby documentation exactly. The
channel definitions, however, are not guaranteed to correspond fully: foobar2000's WAVE writer can
only declare a Windows speaker mask, which has no slot for top-middle (Ts) or wide (Ww) and cannot
express an order such as 7.1's Ls Rs Lrs Rrs. This is a foobar2000 limitation, not a problem with
the rendered order. Properties declares the channel count and no speaker positions; the chunk used
while playing carries foobar2000's default map for that channel count (an unspecified map is rejected
as an invalid audio stream specification and playback fails).
For a multichannel WAV with dwChannelMask = 0, download the CLI from
github.com/TheM14/JustOneCacophony and export with it: it
writes WAVE_FORMAT_EXTENSIBLE with dwChannelMask = 0 and the order above.
Mapping the channels to a player, ASIO, a DAW or a device is up to the user; the component guarantees the content and numbering of each PCM channel as listed above.
Layout names in the configuration follow the table above; a name that cannot be resolved is logged
and falls back to 7.1.
Building
pwsh -File tools/setup_sdk.ps1 # official SDK into SDK/, pinned to target 1.5/1.6
pwsh -File tools/build.ps1 # Win32 -> build\Win32\foo_input_joc.dll
pwsh -File tools/build.ps1 -Platform x64
pwsh -File tools/package.ps1 # both, packaged into dist\*.fb2k-component
The configuration is fixed at Release-Static (static CRT, /MT), and /fp:precise is what the
byte-for-byte acceptance rests on, so it must not be changed. foo_input_joc.vcxproj builds
kernel\joc_kernel.vcxproj first through a project reference; the rendering core sources in
kernel/ are compiled with JOC_STATIC / EJOC_STATIC, so their entry points are neither
imported nor exported. tests\ holds the offline tools (bitstream self-test and cross-check,
render comparison, speaker-layout table and channel-order check, preferences-page layout check,
Chinese and English text-width check, container-probe check) and tools\ the build and test-bed
scripts. Settings also read JOC_*
environment overrides for one run (development only); the list and what each one does is in
src\settings.cpp.
To diagnose a problem, read joc_decoder.log beside the DLL: the component writes its own
version, the core version and the log path there at start-up. The log is capped by bytes: a
file that reaches 16 MiB is rolled to joc_decoder.log.1 beside it, replacing the previous roll
rather than accumulating, so the two together never exceed 32 MiB and the newest lines are always
in joc_decoder.log. The version banner is written again after a roll. A Media Library scan logs
every container in the library, which is where the volume comes from.
Known limitations
- ADM BWF output is not implemented.
- Speaker layouts go up to 9.1.6 (16 channels), the renderer's own output limit; see Speaker layouts and channel order.
- A multichannel layout declares no speaker positions in Properties, and the per-chunk map used for playback is only foobar2000's default for the channel count; output mapping is up to the user's channel assignment (same section).
- All five
joc\_dmx\_config\_idxconfigurations are supported: the bed is paired per audio frame, and its channel count follows the configuration (6 channels for 0/3, 8 for 1/2/4), with-ac 6passed to ffmpeg only for the 6-channel ones. An AC-3 core plus a dependent substream (strmtyp=1) and a first audio frame without JOC are both normal cases. - A container is only claimed when this component is ahead of the built-in container reader in Preferences → Decoding (see Install); the core does not let a decoder ask for a file another entry has already taken. Such a file's tags stay that reader's as well.
- Tags of a bare
.eac3/.ec3(an ID3v2 tag in front of the stream, or an APEv2/ID3v1 tag behind it) can be read but not written: no component claims raw E-AC-3 for writing, and rewriting the whole file to insert a tag is not this component's job. - Transport streams (
.ts,.m2ts) are not claimed. - Force 24-bit output only changes the precision the decoder delivers: foobar2000 converts the
int24 it receives into its own floating-point samples, and which bit depth the output device runs
at is still decided in Preferences → Output, not by this component. Samples outside ±1 follow the
core's
continueclip policy (binaural rendering can exceed full scale, so use Gain when attenuation is wanted). - Playback length is exactly the file's duration. The binaural renderer still computes its room tail, but it is not delivered as playback time the file does not have.
- A seek re-enters the bitstream at the frame holding the target instead of decoding everything in front of it — which is why the cost of a seek does not depend on where it lands. The position is exact and does not drift; the samples are the same waveform handed to a decoder that started there, so they differ from a straight play-through by a low-level noise floor of −59 dBFS or quieter.
Licence
LICENSE is the upstream MIT licence, copied unchanged; kernel/ is a copy of the upstream
rendering core sources, synced to JustOneCacophonyCXX 1.3.1, and keeps their notices. See
THIRD_PARTY_NOTICES.md.