Decode clipgain multiplicatively as 2^(x-4)*(1 + y/32), keep the raw
5-bit offset_ts values and reject frames whose offsets leave 0..23 or are
not strictly increasing, and read the EMDF sample offset as
variable_bits(11). Report parse errors through the frame status: 2
unsupported downmix configuration, 3 object count clamped, 4 parameter
band index, 5 invalid offset_ts, 6 trailing data after byte padding.
Correct the 15/9/5/3 subband-to-parameter-band rows.
Apply the clipgain ramp to the LFE samples before the 1217-sample delay,
stop fading objects in from zero when they have no previous matrix, and
keep disappeared objects published with an all-zero matrix until they
reappear.
Render each frame through the seq state machine: hold the previous
matrices while the decoder is unsynchronized, hard cut on seq 0 or a core
channel count change, and pass the delayed core PCM through when no JOC
metadata is present. Keep the 16-channel output as LFE + 15 objects so
CBA bed channels stay on the fixed-position object path that the ADM,
speaker, and binaural backends already consume.
Update the math notes and README for the multiplicative clipgain, the
no-previous-state interpolation, the LFE gain ramp, and the frame-level
decoding behavior. State that E-AC-3 input without JOC metadata is
outside the supported scope.
- Render 5.1-family and 4.0 layouts through expanded surround geometry before folding.
- Keep trim, balance and automatic position compensation tied to the final target layout.
- Preserve height channels, LFE passthrough and per-object trim bypass behavior.
- Update the bilingual README and mathematical documentation.
Read warp mode from OAMD instead of always scaling the floor Y coordinate.
For eligible layouts, mode 1 uses clamp(2Y, 0, 1), while mode 0 leaves Y
unchanged. Height coordinates are not scaled. Modes 2/3 remain explicitly
unsupported, and the CLI provides no warp override.
Keep separate coordinates for floor panning, height panning and trim
evaluation, with W denoting warp and B denoting front-back balance:
floor Y = B(W(Y))
height Y = B(Y)
trim Y = B(Y)
Apply explicit trims as a position-dependent gain for each object before
accumulation, replacing fixed gains applied to output channels after mixing.
Automatic, disabled and explicit trim modes are mutually exclusive.
Per-object bypass disables balance and trim while retaining warp.
Update controls at OAMD metadata events and retain the previous controls
when a payload has no trim element. Keep source trajectories and binaural
rendering unchanged.
Write the OAMD warp code into dbmd segment 9 while preserving the other
packed fields. Update the bilingual mathematical notes, README files and
code comments to describe parameters and rendering behavior.
Checked: warp 0/1, Y clipping, height coordinates, balance/trim ordering,
per-object bypass, metadata updates, bed positions and LFE passthrough.
Select the trim configuration that applies to the output layout from its
surround and height speaker counts:
cfg = kappa_f(surrounds) + 3 * kappa_h(heights)
Trim and balance apply to seven layouts: 2.0, 3.1, 4.0, 5.1, 5.1.2, 5.1.4
and 7.1. Wider layouts are left untrimmed.
An explicit configuration contributes a static level for the centre,
surround and height groups, which multiplies the panning gains per output
channel. Automatic and disabled configurations contribute no static
level: the attenuation an automatic configuration describes is already
applied per object by the layout position compensation.
An explicit configuration also contributes the two front-back balance
values. Writing n = round(16 |b|) and s = n / 18, each balance
reparameterises the OAMD front-back axis in [0, 1]:
y <= 0.05 or y >= 0.95 -> y
y < 0.5, b > 0 -> (1 + s) y - 0.05 s
y >= 0.5, b > 0 -> (1 - s) (y - 0.5) + 0.5 + 0.45 s
y < 0.5, b < 0 -> (1 - s) y + 0.05 s
y >= 0.5, b < 0 -> (1 + s) (y - 0.5) + 0.5 - 0.45 s
The map is monotonic onto [0.05, 0.95], keeps both walls fixed, and needs
no clamping. Height blends the listener-plane and overhead values before
panning; the horizontal and vertical coordinates are untouched.
Warp is not read here: it selects a downmix mode and does not enter the
speaker path.