Apply the OAMD trim and front-back balance in speaker rendering

Select the trim configuration that applies to the output layout from its
surround and height speaker counts:

    cfg = kappa_f(surrounds) + 3 * kappa_h(heights)

Trim and balance apply to seven layouts: 2.0, 3.1, 4.0, 5.1, 5.1.2, 5.1.4
and 7.1.  Wider layouts are left untrimmed.

An explicit configuration contributes a static level for the centre,
surround and height groups, which multiplies the panning gains per output
channel.  Automatic and disabled configurations contribute no static
level: the attenuation an automatic configuration describes is already
applied per object by the layout position compensation.

An explicit configuration also contributes the two front-back balance
values.  Writing n = round(16 |b|) and s = n / 18, each balance
reparameterises the OAMD front-back axis in [0, 1]:

    y <= 0.05 or y >= 0.95        -> y
    y < 0.5,  b > 0               -> (1 + s) y - 0.05 s
    y >= 0.5, b > 0               -> (1 - s) (y - 0.5) + 0.5 + 0.45 s
    y < 0.5,  b < 0               -> (1 - s) y + 0.05 s
    y >= 0.5, b < 0               -> (1 + s) (y - 0.5) + 0.5 - 0.45 s

The map is monotonic onto [0.05, 0.95], keeps both walls fixed, and needs
no clamping.  Height blends the listener-plane and overhead values before
panning; the horizontal and vertical coordinates are untouched.

Warp is not read here: it selects a downmix mode and does not enter the
speaker path.
This commit is contained in:
TheM14 committed 2026-11-02 17:18:53 +08:00
1 parent 220e791ce9
commit 8424e6bdfb
6 files changed
+420 -12

No files matched your search

+104 -3
View File
@@ -516,7 +516,107 @@ G_{\mathrm{pos}}
\mathbf G_{\mathrm{point}}.
$$
## 12. OAMD 时间对齐与增益斜坡
## 12. OAMD trim 与前后平衡
### 12.1 配置选择
OAMD trim element 把节目的校准数据分成九个配置,由目标布局的附加水平扬声器数
$N_f$ 与高度扬声器数 $N_h$ 选定:
$$
\kappa_f(N)=
\begin{cases}
0, & N=0,\\
1, & N\in\{2,3\},\\
2, & \text{其他},
\end{cases}
\qquad
\kappa_h(N)=
\begin{cases}
0, & N=0,\\
1, & N=2,\\
2, & \text{其他}.
\end{cases}
$$
$$
c_{\mathrm{trim}}=\kappa_f(N_f)+3\,\kappa_h(N_h).
$$
九个配置依次为“no / some / many 附加水平 × no / some / many 高度”。
trim 与前后平衡只在七种布局下施加:2.0、3.1、4.0、5.1、5.1.2、5.1.4、7.1。
更宽的布局(7.1.2、7.1.4、9.1.4、9.1.6)不施加,取 $G_c=1$、$b=0$。
### 12.2 组电平
每个配置给 centre、surround、height 三个组各一个电平 $T_g$(dB)。只有显式配置
施加静态电平:
$$
T_g=
\begin{cases}
\text{记录值}, & \text{显式},\
0, & \text{禁用},\
0, & \text{自动}.
\end{cases}
$$
自动配置不带静态组增益:它描述的衰减量已由 §11 的位置补偿按对象逐个施加,再乘
一次会重复计算。
声道 $c$ 的静态增益为
$$
G_c=10^{T_{g(c)}/20},
$$
$g(c)$ 由声道标签决定:中置归 centre,侧、后、宽归 surround,顶部归 height,左右
与 LFE 不参与,取 $G_c=1$。
### 12.3 前后平衡
每个配置还携带两个前后平衡量:$b_{\mathrm{lis}}$ 作用于听音平面,
$b_{\mathrm{tb}}$ 作用于顶上层层。二者按 $1/16$ 网格量化,只在显式配置下非零。
记 $n=\mathrm{round}(16\,|b|)$、$s=n/18$,单层映射为
$$
B_b(y)=
\begin{cases}
y, & y\le 0.05\ \text{或}\ y\ge 0.95,\\[2pt]
(1+s)y-0.05s, & 0.05<y<0.5,\ b>0,\\[2pt]
(1-s)(y-0.5)+0.5+0.45s, & 0.5\le y<0.95,\ b>0,\\[2pt]
(1-s)y+0.05s, & 0.05<y<0.5,\ b<0,\\[2pt]
(1+s)(y-0.5)+0.5-0.45s, & 0.5\le y<0.95,\ b<0.
\end{cases}
$$
它把 $[0.05,0.95]$ 单调映到自身:两端不动,$y=0.5$ 处两段取值相同,斜率分别为
$1+s$ 与 $1-s$。首尾各 $5\%$ 的墙区以及 $b=0$ 的情形都原样通过,因此映射不会
越界,也无需额外钳位。
高度 $w$ 把两层混合起来:
$$
y'=(1-w)\,B_{b_{\mathrm{lis}}}(y)+w\,B_{b_{\mathrm{tb}}}(y).
$$
前后轴 $y$ 的取向见 §9,$0$ 为前、$1$ 为后;$x$ 与 $z$ 不变。
### 12.4 施加位置
前后平衡在声像之前作用于对象坐标的第二个分量:
$$
y_o\longmapsto y_o',
$$
组增益则乘在声像结果上,即 §14 混音式中的 $g_{o,c}$ 替换为 $G_c\,g_{o,c}$。
warp 不参与上述任何一步:它是下混模式的选择位,只影响下混路径,不改变对象坐标。
## 13. OAMD 时间对齐与增益斜坡
OAMD 更新的编码位置为
@@ -572,7 +672,7 @@ $$
如果中途没有新的 metadata 更新,该过程等价于总长度 $KB$ 的逐样本线性斜坡。
## 13. 最终扬声器混音
## 14. 最终扬声器混音
对目标输出声道 $c$:
@@ -604,9 +704,10 @@ y_{24}[n]=
\right).
$$
## 14. 公式适用范围
## 15. 公式适用范围
- JOC 矩阵部分同时描述 dense MTX 与 sparse IDX/VEC 两条差分语法。
- 扬声器声像部分描述普通点对象;extent、spread、divergence 等模式需要额外模型。
- 多个 OAMD position block 必须按其时间顺序调度。
- limiter 属于独立后处理,不包含在上述混音公式中。
- trim 与前后平衡只作用于扬声器渲染;双耳渲染不读取它们。