Honor OAMD warp modes and position-dependent speaker trims
Read warp mode from OAMD instead of always scaling the floor Y coordinate.
For eligible layouts, mode 1 uses clamp(2Y, 0, 1), while mode 0 leaves Y
unchanged. Height coordinates are not scaled. Modes 2/3 remain explicitly
unsupported, and the CLI provides no warp override.
Keep separate coordinates for floor panning, height panning and trim
evaluation, with W denoting warp and B denoting front-back balance:
floor Y = B(W(Y))
height Y = B(Y)
trim Y = B(Y)
Apply explicit trims as a position-dependent gain for each object before
accumulation, replacing fixed gains applied to output channels after mixing.
Automatic, disabled and explicit trim modes are mutually exclusive.
Per-object bypass disables balance and trim while retaining warp.
Update controls at OAMD metadata events and retain the previous controls
when a payload has no trim element. Keep source trajectories and binaural
rendering unchanged.
Write the OAMD warp code into dbmd segment 9 while preserving the other
packed fields. Update the bilingual mathematical notes, README files and
code comments to describe parameters and rendering behavior.
Checked: warp 0/1, Y clipping, height coordinates, balance/trim ordering,
per-object bypass, metadata updates, bed positions and LFE passthrough.
This commit is contained in:
1 parent
8424e6bdfb
commit
0e28cd085c
17 files changed
+335
-191
No files matched your search
+56
-25
@@ -443,14 +443,16 @@ $$
|
||||
$$
|
||||
|
||||
对于只有一对水平环绕、没有独立 side/rear 两对的布局(5.1 系列,以及 4.0 这类
|
||||
只有一对后置声道的布局),纵向坐标使用
|
||||
只有一对后置声道的布局),仅在 OAMD `warp_mode=1` 时,纵向坐标使用
|
||||
|
||||
$$
|
||||
v_{\mathrm{floor}}=
|
||||
\mathrm{clamp}(2v,0,1).
|
||||
$$
|
||||
|
||||
其他布局使用 $v_{\mathrm{floor}}=v$。
|
||||
`warp_mode=0` 或其他布局使用 $v_{\mathrm{floor}}=v$。高度层不做该缩放。
|
||||
未携带 warp 元数据时采用 0;命令行不提供覆盖选项。2/3 保留为未实现,报错而不回退。
|
||||
有 front/back balance 时,先求这里的分支坐标,再应用 §12.3 的 balance。
|
||||
|
||||
### 10.3 高度层
|
||||
|
||||
@@ -471,6 +473,9 @@ $$
|
||||
|
||||
## 11. 布局位置补偿
|
||||
|
||||
本节是 trim 为 automatic 时的逐对象增益。disabled 取 1;explicit 改用 §12.2,
|
||||
不能把 automatic 增益与 explicit trim 再乘一遍。
|
||||
|
||||
令 $N_h$ 为相关高度扬声器数,$N_f$ 为相关附加水平扬声器数:
|
||||
|
||||
$$
|
||||
@@ -546,38 +551,54 @@ $$
|
||||
九个配置依次为“no / some / many 附加水平 × no / some / many 高度”。
|
||||
|
||||
trim 与前后平衡只在七种布局下施加:2.0、3.1、4.0、5.1、5.1.2、5.1.4、7.1。
|
||||
更宽的布局(7.1.2、7.1.4、9.1.4、9.1.6)不施加,取 $G_c=1$、$b=0$。
|
||||
更宽的布局(7.1.2、7.1.4、9.1.4、9.1.6)取 $g_t=1$、$b=0$。
|
||||
|
||||
### 12.2 组电平
|
||||
warp、trim 和 balance 均从 OAMD 元数据读取。各参数的取值与作用为:
|
||||
|
||||
每个配置给 centre、surround、height 三个组各一个电平 $T_g$(dB)。只有显式配置
|
||||
施加静态电平:
|
||||
| 参数 | 取值或单位 | 行为 |
|
||||
|---|---|---|
|
||||
| `warp_mode` | 0 / 1 | 选择 §10.2 的地面 Y 映射;2/3 暂不支持,遇到时明确报错 |
|
||||
| `global_trim_mode` | 0 / 1 / 2 | automatic / disabled / 按目标布局配置选择;3 为保留值,明确报错 |
|
||||
| $T_s$、$T_h$ | dB | 显式 surround、height trim 参数,正值按 0 处理 |
|
||||
| $T_c$ | dB | 显式 centre trim 参数,保留符号 |
|
||||
| $b_{\mathrm{lis}}$、$b_{\mathrm{tb}}$ | $[-1,1]$,步长 $1/16$ | 听音平面、顶部的前后 balance |
|
||||
| 逐对象 trim bypass | 布尔值 | 关闭该对象的 balance 和 trim 增益,保留 warp |
|
||||
|
||||
全局模式为 2 时,所选配置的 default 或 disabled 标志分别采用 automatic 或 disabled;
|
||||
缺失配置采用 automatic,其他配置使用其显式参数。automatic 使用 §11 的位置补偿,
|
||||
disabled 使用单位增益,explicit 使用 §12.2,三种模式互斥。
|
||||
|
||||
初始没有 trim element 时采用 `warp_mode=0`、automatic trim。后续 payload 不含该
|
||||
element 时保持上一组控制;出现新 element 时,在对应元数据事件边界更新。命令行不提供
|
||||
warp 覆盖选项。
|
||||
|
||||
### 12.2 逐对象电平
|
||||
|
||||
centre、surround、height 是位置相关 trim 函数的参数,不是混音后各输出声道的固定增益。
|
||||
令 $y_t$ 为原始 Y 经 balance 后的坐标,$z=\max(w,0)$:
|
||||
|
||||
$$
|
||||
T_g=
|
||||
\begin{cases}
|
||||
\text{记录值}, & \text{显式},\
|
||||
0, & \text{禁用},\
|
||||
0, & \text{自动}.
|
||||
\end{cases}
|
||||
a_s=\mathrm{clamp}(2y_t,0,1)(1-z),\qquad a_h=z,
|
||||
$$
|
||||
|
||||
自动配置不带静态组增益:它描述的衰减量已由 §11 的位置补偿按对象逐个施加,再乘
|
||||
一次会重复计算。
|
||||
|
||||
声道 $c$ 的静态增益为
|
||||
|
||||
$$
|
||||
G_c=10^{T_{g(c)}/20},
|
||||
a_c=1-\mathrm{clamp}\bigl(10\max(|z|-0.05,\ y_t-0.05,\ |u-0.5|-0.05),0,1\bigr).
|
||||
$$
|
||||
|
||||
$g(c)$ 由声道标签决定:中置归 centre,侧、后、宽归 surround,顶部归 height,左右
|
||||
与 LFE 不参与,取 $G_c=1$。
|
||||
explicit 状态下,surround/height 参数上限为 0 dB,centre 保留有符号电平:
|
||||
|
||||
$$
|
||||
D=a_s\min(T_s,0)+a_h\min(T_h,0)+a_cT_c,\qquad g_t=10^{D/20}.
|
||||
$$
|
||||
|
||||
同一个 $g_t$ 乘该对象的整条声像增益向量,然后才累加不同对象。automatic 使用 §11;
|
||||
disabled 或逐对象 trim bypass 取 $g_t=1$。LFE 仍直接通过。
|
||||
增益求值、声像插值和对象累加均使用 float64。
|
||||
|
||||
### 12.3 前后平衡
|
||||
|
||||
每个配置还携带两个前后平衡量:$b_{\mathrm{lis}}$ 作用于听音平面,
|
||||
$b_{\mathrm{tb}}$ 作用于顶上层层。二者按 $1/16$ 网格量化,只在显式配置下非零。
|
||||
$b_{\mathrm{tb}}$ 作用于顶部。二者按 $1/16$ 网格量化,只在显式配置下非零。
|
||||
|
||||
记 $n=\mathrm{round}(16\,|b|)$、$s=n/18$,单层映射为
|
||||
|
||||
@@ -606,15 +627,25 @@ $$
|
||||
|
||||
### 12.4 施加位置
|
||||
|
||||
前后平衡在声像之前作用于对象坐标的第二个分量:
|
||||
记 §12.3 的高度混合 balance 映射为 $B_z(y)$,§10.2 的 warp 映射为 $W(y)$。
|
||||
普通点对象的实际分支顺序为
|
||||
|
||||
$$
|
||||
y_o\longmapsto y_o',
|
||||
y_f=B_z(W(y)),\qquad y_h=B_z(y),\qquad y_t=B_z(y).
|
||||
$$
|
||||
|
||||
组增益则乘在声像结果上,即 §14 混音式中的 $g_{o,c}$ 替换为 $G_c\,g_{o,c}$。
|
||||
地面和高度声像分别使用 $y_f,y_h$,trim 函数使用 $y_t$。最后组合
|
||||
|
||||
warp 不参与上述任何一步:它是下混模式的选择位,只影响下混路径,不改变对象坐标。
|
||||
$$
|
||||
g_{o,c}=G_{\mathrm{object}}\,g_t(u,y_t,z)\,P_c(u,y_f,y_h,z).
|
||||
$$
|
||||
|
||||
因此可概括为 warp → balance → trim 与声像增益合成,但不能让所有阶段共用一个
|
||||
已经 warp 的 Y。balance 仅在 explicit 且未逐对象 bypass 时启用;warp 不受 trim
|
||||
状态或 trim bypass 控制。源坐标保持原值,ADM 与 binaural 不预烘焙此变换。
|
||||
|
||||
地面坐标依次经过 warp、balance,再用于地面声像;顶部坐标和 trim 求值坐标只经过
|
||||
balance。trim 标量乘到该对象的整条声像增益向量后,再累加到输出声道。LFE 直接通过。
|
||||
|
||||
## 13. OAMD 时间对齐与增益斜坡
|
||||
|
||||
|
||||
Reference in new issue
Block a user